Our company

Milltex S.p.a.

Via Bertolotta, 62
43010 Trecasali- Parma (Pr)
Tel. 0521 874030/371003
Fax 0521 874029
milltex@milltex.it

Pickup type

Machine Details
Category: unwind-stands
MAX WIDTH mm: 2500
MIN WIDTH mm: 1000
MAX REELS DIAMETER mm: 2100
MIN REELS DIAMETER mm: 400
STANDARD REELS WEIGHT kg: 4500
SPEED mt/min: 950
STANDARD BRAKE TYPE: Pneumatic Brake
OPTIONAL BRAKE: D.C. Motor or A.C. Motor

Machine Description

Unwinds PICK-UP type, normally located at the rear of the sheeters or rear of the slitter rewinder.

The up and down movements are all hydraulic and are directly controlled from the console by selectors that control the solenoid valves.

The axial movements of the arms are made by two and can be controlled separately.

The reels is centred ( simultaneous axial movement of the two reel-holder arms) by hydraulic cylinders of the on the reel-holder arms.

The gripping spindles carry two mechanical expanding devices designed to go into reel core.

The reel braking occurs by servoventilated air cooled pneumatic brakes.

The brake is placed at the outer and of the reel-holder spindles and are therefore directly controlled by the reel rotation.

The brakes are controlled in order deep constant the pull of the paper web being unwound.

This operation occurs thanks to be decreasing calculation system placed on the panel control.

The operator has to set the required driving values in kg by digitising them on the keyboard, after that the keeping constant of the driving power will happen automatically.

Special unwinds type
Unwinds with central arms. With this type of unwinds is possible to cut 2 reels contemporarily even if with different diameters